Off Grid Solar Inverter with charger
SP6000-SW
HYBRID solar INVERTER with charger
SP1200-11000-SW
SP1200/2400/3600-SR
Hybrid / Off-Grid solar Inverter with AVR and charger
SP4000-AVR
High-Efficiency Hybrid / Off-Grid solar Inverter with charger
SP1000-5000 Efecto
True Hybrid Solar Inverter (on grid+off grid)
SP3000 Premium
All in one silent generator with AC utility and Solar charging
EP1200/2400/3600-SR
Solar Pumping System
Three Phase AC solar pumping inverter
DC Solar pumping inverter
Simulate sinewave Solar Inverter with charger
SP300Junior/SP600Junior
true sinewave inverter
INS-700/INS-1000
simulated sinewave inverter
IN-150S
Solar Charger PWM (Light control)
SC-10LC/SC-20LC/SC-30LC
Solar Charger PWM
SC-45/SC-60
Solar Charger MPPT
SC-50 MPPT / SC-80 MPPT /
SC-80X MPPT
Solar Charger MPPT
SC-10 MPPT/SC-30 MPPT
Solar Charger PWM (IP67)
SC-05SM /SC-10SM /
SC-15SM / SC-20SM
SOLAR MODULE
OM6PV230
SOLAR LIGHT SYSTEM
MSS-10
Solar Power System
MSS-20 Super
solar power bank (MPPT)
12W Green Energy Kit
Solar Toys
Solar Carbon Fiber Car
OFF-GRID INVERTER
SP6000-SW
The OPTI-Solar OFF-GRID INVERTER, una versátil solución todo en uno, proporciona una potencia limpia de salida sinusoidal verdadera perfecta combinada con una corriente de carga de batería multifase que se puede seleccionar. El OFF-GRID INVERTER es adecuado para cualquier tipo de aplicación como, por ejemplo, aparatos de aire acondicionado o cualquier otro aparato doméstico, y su cargador inteligente carga automáticamente cualquier tipo de batería sin el riesgo de sobrecarga. Además, su diseño compacto y modular facilita y abarata la instalación. Este producto de alta calidad ofrece la mejor relación precio/rendimiento de la industria.
* Base de diseño con varios microprocesadores
* Compatible con carga lineal y no lineal
* Cargador más robusto que admite baterías de 600 AH y más
* Funcionamiento de 24 horas en el inversor
* Panel controlable y extraíble con pantalla LCD
* Parámetro que se puede definir por adelantado
* Función de inicio de CC y de autodiagnóstico automático
* Diseño para instalación en bastidor de 19" 3u o diseño para instalación en pared
* Diseñado para trabajar en entornos duros
* Baja disipación de calor en funcionamiento a largo plazo
* THD inferior al 3%
* AC/DC Priority Switchable CPU
APLICACIONES
Aplicación Industrial, Residenciales, Comerciales
|
Model |
SP6000-SW |
||
|
Capacity |
VA / Watt |
6KVA / 6000W |
|
|
AC Input (from Grid) |
Nominal Voltage |
120Vac or 230Vac |
|
|
Voltage Range |
Acceptable Voltage Range |
60-135Vac or 120-270Vac |
|
Low Voltage Transfer |
60VAC ± 3% or 120VAC ± 2% |
||
Low Voltage Return |
65VAC ± 3% or 130VAC ± 2% |
||
High Voltage Transfer |
135VAC ± 3% or 270VAC ± 2% |
||
High Voltage Return |
130VAC ± 3% or 260VAC ± 2% |
||
|
Frequency |
50Hz or 60Hz |
||
|
DC Input (from Array) |
Nominal Voltage |
48V |
|
|
Charger Voltage |
55.2V |
||
|
Solar Maximum Peak Voltage |
100V |
||
|
Start-up Voltage |
44V |
||
|
Polarity Protect |
Yes |
||
|
Backflow Protect |
Yes |
||
|
Maximum Charge Current |
40A |
||
|
Output |
Voltage |
120 Vac (110V or 115Vac re-settable via LCD panel) |
|
|
Voltage Regulation (Battery Mode) |
< 3% RMS for entire battery voltage range |
||
|
Frequency Regulation |
Line Mode |
Synchronized to AC Main |
|
|
Battery Mode |
50Hz or 60Hz ± 0.1Hz |
||
|
Power Factor |
1.0 |
||
|
Waveform |
Pure Sinewave |
||
|
Overload Protection |
Line Mode |
> 110%, then buzzer alarms and amber LED blinks continuously |
|
|
Battery Mode |
110% ~ 150% for 30 sec; >150% for 200ms |
||
|
Short Circuit Protection |
Line Mode |
Circuit Breaker |
|
|
Battery Mode |
Electronic Circuit |
||
|
Transfer Time |
Typical |
< 8 ms. |
|
|
Battery |
Battery Voltage |
48Vdc |
|
|
Backup Time |
Depends on System Load and Battery Capacity (Based on the batteries connected) |
||
|
Selectable Charging Current |
20A / 40A / 60A |
||
|
Display |
LCD |
Inverter status, I/P&O/P Voltage Frequency, Load Level, |
|
|
LED |
Normal (Green), Warning (Amber), Fault (Red) |
||
|
Audible Alarm |
Battery Mode |
Beeping every 4 seconds |
|
|
Low Battery |
Beeping every second |
||
|
Inverter Fault |
Beeping Continuously |
||
|
Overload |
Beeping twice per second |
||
|
Environment |
Operation Temperature |
0-40 degree C; 32-104 degree F |
|
|
Relative Humidity |
0-95% non-condensing |
Audible Noise |
Less than 55dBA (at 1M) |
|
Physical |
Net/ Gross Weight (Kg) |
51.4/ 66.6 |
|
|
(W x H x D) (mm) |
415 x 600 x 260 |
||
|
Accessory |
RS232 or SNMP |
Optional |
|
DESCARGAS
| El manual del usuario - Descargar el manual del usuario |
Catálogo - Descargar catálogo |
CERTIFICACIONES
 |
CE for SP Series |