GRID-TIED INVERTER
GT 1500/2000/3000/4000/6000
HYBRID INVERTER
SP1200-11000-SW
SP1200/2400/3600-SR
OFF-GRID INVERTER
SP6000-SW
LOG
OPTI-LOG
SOLAR MODULE
OM6PV230
multi functional solar system
MSS-20
Solar Power 2
Solar Power2
Solar Charger PWM
SC-10LC/SC-20LC/SC-30LC
Solar Charger MPPT
SC-50 MPPT / SC-80 MPPT /
SC-80X MPPT
Solar Charger
SC-05SM /SC-10SM /
SC-15SM / SC-20SM
Solar Charger
HC-600W
12W Green Energy Kit
12W Green Energy Kit
Cha Car ®
The Pioneer Solar Carbon Fiber Car
OFF-GRID INVERTER
SP6000-SW
The OPTI-Solar OFF-GRID INVERTER, a powerful all-in-one solution, delivers unsurpassed clean true sine wave output power combined with a selectable multistage battery charging current. The Hybrid/Off-Grid Inverter is suitable for any kind of applications such as air conditioner or any other home appliances, and its intelligent charger automatically charges any types of batteries without the risk of overcharge, while its compact & modular design makes installation easier and more cost efficient. This high quality product offers the best price/performance ratio in the industry.
| * Multiple Microprocessor design base * Compatible with both linear and non-linear load * Stronger charger to support batteries of 600AH and up * 24 hours operation on the inverter * Controllable & Removable panel with LCD * Parameter Pre-settable * DC start and automatic self-diagnostic function |
* 3u 19” Rack-mount design or Wall-mount design * Designed to operate under harsh environment * Low heat dissipation in long time operation * THD less than 3% * High efficiency design to save electricity * AC/DC Priority Switchable CPU |
APPLICATIONS
Residential, Commercial, and Industrial application
|
Model |
SP6000-SW |
||
|
Capacity |
VA / Watt |
6KVA / 6000W |
|
|
AC Input (from Grid) |
Nominal Voltage |
120Vac or 230Vac |
|
|
Voltage Range |
Acceptable Voltage Range |
60-135Vac or 120-270Vac |
|
Low Voltage Transfer |
60VAC ± 2% or 120VAC ± 3% |
||
Low Voltage Return |
65VAC ± 2% or 130VAC ± 3% |
||
High Voltage Transfer |
135VAC ± 2% or 270VAC ± 3% |
||
High Voltage Return |
130VAC ± 2% or 260VAC ± 3% |
||
|
Frequency |
50Hz or 60Hz |
||
|
DC Input (from Array) |
Nominal Voltage |
48V |
|
|
Charger Voltage |
55.2V |
||
|
Solar Maximum Peak Voltage |
100V |
||
|
Start-up Voltage |
44V |
||
|
Polarity Protect |
Yes |
||
|
Backflow Protect |
Yes |
||
|
Maximum Charge Current |
40A |
||
|
Output |
Voltage |
120 Vac (110V or 115Vac re-settable via LCD panel) |
|
|
Voltage Regulation (Battery Mode) |
< 3% RMS for entire battery voltage range |
||
|
Frequency Regulation |
Line Mode |
Synchronized to AC Main |
|
|
Battery Mode |
50Hz or 60Hz ± 0.1Hz |
||
|
Power Factor |
1.0 |
||
|
Waveform |
Pure Sinewave |
||
|
Efficiency |
> 90% |
||
|
Overload Protection |
Line Mode |
> 110%, then buzzer alarms and amber LED blinks continuously |
|
|
Battery Mode |
110% ~ 150% for 30 sec; >150% for 200ms |
||
|
Short Circuit Protection |
Line Mode |
Circuit Breaker |
|
|
Battery Mode |
Electronic Circuit |
||
|
Transfer Time |
Typical |
< 8 ms. |
|
|
Battery |
Battery Voltage |
48Vdc |
|
|
Backup Time |
Depends on System Load and Battery Capacity (Based on the batteries connected) |
||
|
Recharging Current |
>60A |
||
|
Display |
LCD |
Inverter status, I/P&O/P Voltage Frequency, Load Level, |
|
|
LED |
Normal (Green), Warning (Amber), Fault (Red) |
||
|
Audible Alarm |
Battery Mode |
Beeping every 4 seconds |
|
|
Low Battery |
Beeping every second |
||
|
Inverter Fault |
Beeping Continuously |
||
|
Overload |
Beeping twice per second |
||
|
Environment |
Operation Temperature |
0-40 degree C; 32-104 degree F |
|
|
Relative Humidity |
0-95% non-condensing |
Audible Noise |
Less than 55dBA (at 1M) |
|
Physical |
Net/ Gross Weight (Kg) |
51.4/ 66.6 |
|
|
(W x H x D) (mm) |
415 x 600 x 260 |
||
|
Accessory |
RS232 or SNMP |
Optional |
|
DOWNLOAD
| User Manual - Download User Manual |
Catalogue - Download Catalogue |
CERTIFICATIONS
 |
CE for SP Series |